BackBack

You & Me Heart Tree

Write a review
| Ask a question

$6.00

This is such a fun and romantic design to share with your loved one!

Project Details

The 3 slots are made for 1/8" thick material, but they are editable and you can adjust them if needed for a tighter fit.

** ITS VERY IMPORTANT THAT YOU MEASURE YOUR OWN MATERIALS WITH CALIPERS AND ADJUST THE SLOTS TO MATCH YOUR MATERIALS **

The hearts are intentionally backwards with numbers engraved on the back so that you can easily match them up with the corresponding numbered hearts on the tree during assembly (you'll be so glad for this!)

I made my version of this design using my Glowforge laser and the following materials (also from Glowforge) - but you can use any materials you like:
• Medium Proofgrade Walnut Plywood
• Medium Proofgrade Maple Plywood
• Medium Proofgrade Red Acrylic

Important Details:

  • Base is 11.5”long x 1.6” wide and is 2 layers of ~3/16” thick material
  • Tree is 7.3“x7.8”
  • Slots are sized for ~3./16” thick materials. Adjust slots if needed
  • Hearts are numbered on the back and the tree is numbered on the front, so you’ll be able to easily match each up for assembly when gluing
  • SVG and PDF formats


* NOTE: All materials vary in thickness from batch to batch so you may need to adjust the pieces and slots to get the fit you desire. ALWAYS, ALWAYS, ALWAYS measure your materials with calipers and compare to the slots in the design before cutting.

I use LocTite GO2 glue for all of my projects.

This section doesn’t currently include any content. Add content to this section using the sidebar.