Jewelry Display

Need a way to display jewelry or other small carded items that hang on pegs? This file is for you!

This design is free, but no support will be available for it. It comes as-is. It's been used by a LOT of people, so it works well, but you'll need to sort through the included files on your own.😎 

Project Details

File Formats Included: AI and SVG

There are files for two different thicknesses included.

The display comes with 6 different peg designs of varying lengths and shapes and and 3 of them come with a small extension in the back where you could hang overstock or additional items.

The legs and pegs are all removable, so you can easily flat pack it for travel - and there are two sets of legs included as well! One is for quick assembly and the other is if you'd like to glue it all together!

The materials I used are "Thick Walnut Plywood" and "Thick Maple Plywood" (approx 3/16”) from Glowforge. Each batch of any kind of wood varies in thickness, so you will need to measure your materials and adjust the slots if needed.

------- DETAILS -------
The overall measurements of the finished item are:
- 15.5" long
- 9.25" tall
- 4.6" deep

Other measurements:
- Peg holes are 2.5" apart and are .18" x .254"
- Slots are .186" x .014"
- 6 different peg designs are included and lengths vary

* Note *
I HIGHLY RECOMMEND THAT YOU ISOLATE ONE OF THE PEG HOLES ANS ONE PEG AND CUT THEM FIRST TO ENSURE YOU MATERIAL THICKNESS WILL WORK. Then you can cut the rest with confidence.