Decorative Plant Chair
$7.00 $4.20
Here's a cute and fun way to display your small potted plants or flowers! It's a small and beautiful bench chair with a 5.5" hole to hold the pot.
Project Details
The slots are .23" wide and I used 1/4” plywood (I used walnut plywood from www.ocoochhardwoods.com). The fit was quite tight and needed no glue. **See IMPORTANT section below.
If you'd like to use other materials, all you'll need to adjust is the size of the 4 green rectangles on each side piece.
- The slots are .23” wide each
- Remember to either use a weatherproof material and/or use multiple coats of sealant to help protect your bench.
The overall measurements of the finished item are:
- 7.8" long
- 14.5" tall
- 7.5" deep
>> IMPORTANT:
The tabs and slots for the pieces to fit together are made for .25" plywood. ALL MATERIALS CAN VARY IN THICKNESS FROM BATCH TO BATCH, so you will need to measure your materials and adjust the slots if needed.
MY SETTINGS (for reference purposes only):
I cut mine with a Glowforge Basic and used 115 speed/full power
I use LocTite GO2 glue for all of my projects.
