Dinosaur Letter B Bank (Letter B only)
$7.00 $4.20
What kid doesn't love dinosaurs? This file is for the dinosaur-themed letter bank - LETTER B ONLY - and is just the right size for the young and young at heart to save those coins in - and the sliding door in the base makes it easy to empty whenever they like (and there's even a small loop in the door to put a lock on if they want to)!
The file comes with your choice of 4 different dinosaurs and several tree options that you can combine to make the look and feel you want. And then when you add paint colors, the banks really come alive!
Learn more about this amazing bank under the Project Details tab above where you can watch my extensive Project and File Overview video and read all of the important info.
** Want the entire 26 Letter Bank Set? Get it here: https://bigbluelaserdesigns.com/products/dinosaur-letter-bank-set
* Digital Download Only. No Physical Items Included. These are files to cut on your laser. *
Project Details
Project Overview Video (for the entire set):
Base and Bank Quick Assembly Video:
PROJECT OVERVIEW:
WATCH THE VIDEOS ABOVE FOR *ALL* OF THE INFO YOU'LL NEED FOR THIS PROJECT!
- This project is made for 1/4" material. It is not suitable for 1/8".
- Watch all support videos and read README PDFs before cutting
FILE FORMATS:
- Ai
- SVG
- DXF
MEASUREMENTS:
- The letters average 6.41" wide x 2.79" deep x ~6" tall. Some letters like M and W are quite a bit wider.
- Coin slot on top size: 2" wide x approx 0.5" (varies with the thickness of the material you use)
-
Slot size is 0.26" to allow for paint. A snug fit is not necessary.
-
Tab length is 0.65". The base is 3 layers thick, so your material needs to be 0.216" or thicker or you'll need to shorten the base tab.
MATERIAL I USED:
- 1/4" MDF + 1/8" clear acrylic
- Slot size is 0.26" to allow for paint. A snug fit is not necessary.
- Tab length is 0.65". The base is 3 layers thick, so your material needs to be 0.216" or thicker or you'll need to shorten the base tab.
- ALWAYS measure your material and adjust if needed before cutting.
- Rustoleum Filler Primer
- Montana 94 Spray Paint
- Gorilla Glue Super Glue Gel
AMOUNT OF MATERIAL NEEDED:
- Less than 2 Glowforge-sized sheets of 1/4" MDF (11" x 19") and ~1/6 of a sheet of 1/8" clear acrylic
** Here are the little padlocks I bought from Amazon that I mentioned in the video. They aren't super high quality, but they are just for fun and I think your kids will enjoy them. https://amzn.to/41Tpdj8
