4x6 Layered Bank with Sliding Back

If you need a small bank that's simple to make, this is just the ticket! It can be made with a single sheet of material - and you can easily resize it without any adjustments! Read the entire description and watch the video under Project Details to learn more.

* Digital Download Only. No Physical Items Included. This is a file to cut on your laser. *

Project Details

PROJECT OVERVIEW:

• Watch the Project Overview Video!
• The initial size is 4" x 6" x (whatever combo of materials you choose)
• You can select all of the pieces together and resize to whatever size you like without any adjustments
• There are 2 options included for the acrylic layer. One treats it as a full size layer like the wood layers. The other includes the use of a u-shaped frame that the smaller acrylic rectangle nests into, making the acrylic not visible from the edges.
• Material Thicknesses: You can use any that you like, BUT I highly recommend that you use 1/4" for the spacers (at least 3) to give the bank good depth. The rest of the pieces can be 1/8" if you like. The bank pictured is ALL 1/4" except the acrylic. 
• The "Saving for a Change" graphic is included if you'd like to use it. Or you can delete it and add your own.
• I recommend that you engrave backwards on clear acrylic so that the engraving is smooth from the viewing side.

FILE FORMATS:

• Ai
• SVG
• PDF
• DXF

MEASUREMENTS:

• 4" tall x 6" long x the combination of whatever material thicknesses you use.

MATERIAL I USED:

• I used 1/4" MDF and 1/8" clear acrylic
• Rustoleum Spray Primer and Paint
• Titebond Quick and Thick Multi-Surface Glue

AMOUNT OF MATERIAL NEEDED:

• You can make this bank with 3 spacers from just a single sheet of 11" x 19" material + a 4" x 6" rectangle of clear acrylic. 
  
• See the Overview Notes and Video above for my suggestions for material thicknesses and number of spacers.