Letter Bank Set V2 with Sliding Door (26 Letters A-Z)

This set of Letter Banks includes all 26 letters and comes with a sliding door on the bottom and even has a ring that you can add a simple T to or even a small padlock. And you can add a name or other text to a layer to give it even more personality! Paint them, use colored acrylic or PatternPly - whatever you like!

Learn more under the Project Details tab above.

** I have THREE videos in the listing to help you get the most out of this project!

* Digital Download Only. No Physical Items Included. This is a File to Cut on Your Laser. *

Project Details

LIVE PROJECT OVERVIEW:

This set of Letter Banks were Exclusive to my December 2022 VIP Subscribers and are finally available to the public! This was a video that I did LIVE in our private VIP Facebook group to introduce the set to them and talk through how they work and give a few tips and tricks along the way to get the most out of it!

PROJECT OVERVIEW VIDEO

 FILE OVERVIEW VIDEO:

PROJECT OVERVIEW:

• Watch the File Overview Video and Project Overview Videos above!

• The set includes all 26 letters, A-Z.
  
  
• All of the banks use the *same* base with a sliding door, making it easy to get the money out AND for you as the maker because all 26 letters use the same base.

• This project is designed for 1/4" material (0.21"-0.25"). Although thinner material *can* be used, you'll have to use a LOT more layers, so I don't recommend it. 
  
  
• The number of spacers you'll use will be 6-7, depending on the thickness of your material. See overview videos.
  
  
• You'll always start by measuring your material with your calipers and then edit the base slot if needed.
  
  
• FUN OPTION! Add a name or other text to one of the spacer layers to personalize each bank for even more value!
  
  
• Marketing Photos Included in your download folder

FILE FORMATS:

• Ai
• SVG
• PDF
• DXF

MEASUREMENTS:

• ~5.75" tall x 6.41" wide x 2.79" deep

MATERIALS I USED:

• 1/4" MDF
• NOTE: I have two different thicknesses of 1/4" MDF - 0.21" and 0.25" - so I used 6 spacers with the 0.25" and 7 spacers with the 0.21".  
• 1/4" or 1/8" acrylic for the clear front. Either thickness can be used.
• Rustoleum Filler Primer Spray Paint and Montana 94 Spray Paints
• Gorilla Glue Super Glue Gel
• Various PatternPly MDF from https://smokeyhilldesigns.com/ 

AMOUNT OF MATERIAL USED:

• 1-2 sheets of 11" x 19" 1/4" material depending on the letter. Some only take 1 sheet, while others take a bit more. The letter W, for instance, is quite wide, so it takes the most, whereas the A fits on a single sheet.

ADDITIONAL NOTES:

• Slot size: 0.25"
• You'll measure your materials and adjust the slot to fit your material
• IMPORTANT: If you're painting the pieces, be SURE to allow for the additional thickness of paint on the tab to fit into the slot
• The combination of your spacers need to be at least 1.3" to cover the hole in the base. That typically means 6-7 spacers. 
• The length of base tab is 0.69" and there are 3 layers for the base - so if your material is thinner than 0.23", you'll need to shorten the tab so it doesn't stick out of the bottom.
  
  
• I got a cute, inexpensive set of small padlocks that can be used with the banks. They're not heavy duty, but they could be fun for a young child. You can check them out here. https://amzn.to/3PAHFbm