Christmas Village Set
$29.00
This Christmas Village Set comes with 4 buildings and a Town Square for an adorable set for your table or mantle! There are links to the individual listings for each of the buildings below, so click those to find out all of the details for each of them.
- The Town Hall is a grand centerpiece of the Christmas Village with a large clock in the tower and a rounded set of stairs leading to a revolving door.
- The Firehouse is classic with it's two large doors at the front and back, the lampposts, and the "No. 1" at the top. And the roof sports a skylight and looks so cute with the village.
- The little store brings back memories of days gone by (or memories of movies you've seen if you're a youngin'). It pairs perfectly with our Barber Shop building.
- The Barber Shop & Shoe Shine is a cute little building that can stand by itself -or- it can snuggle up to the Store and be a great part of the whole village feel!
- The Town Square elements are designed as a companion to our Christmas Village Set. It includes a Christmas Tree and Layered Base for the tree to stand on, lampposts, benches, and a Santa statue.
Learn more under the Project Details tab.
* Digital Download Only. No Physical Items Included. This is a file to cut on your laser. *
Project Details
PROJECT OVERVIEW:
This Set includes 4 buildings and the Town Square. All of the details for each building are listed below.
------
TOWN HALL:
PROJECT OVERVIEW VIDEO: https://youtu.be/qVVPTImzHyI
TIPS:
- Watch the Project Assembly Video for a complete walkthrough of assembly.
- We painted all of the pieces after cutting.
- We recommend painting both sides of the roof pieces because at certain angles you can see the undersides of them.
** MARKETING PHOTOS INCLUDED!
FILE FORMATS:
- Ai
- SVG
- DXF
MEASUREMENTS:
- 6.5" tall x 8.35" long x 10" deep (including stairs)
AMOUNT OF MATERIAL NEEDED:
- 1.3 sheets of 11" x 19" material
MATERIAL I USED:
- 1/8" MDF - the design is made for 0.125" material.
- Rustoleum Spray Primer and Montana 94 Spray Paints
- Gorilla Glue Super Glue Gel
------
FIREHOUSE:
PROJECT OVERVIEW VIDEO: https://youtu.be/4ZdWJaoYJHY
TIPS:
- Watch the Project Assembly Video for a complete walkthrough of assembly.
- We painted the pieces after cutting them - EXCEPT the "No. 1" sign. With that sign, we pre-painted a small scrap of MDF and then masked and cut/engraved it so the engraving would be nice and clean.
** MARKETING PHOTOS INCLUDED!
FILE FORMATS:
- Ai
- SVG
- DXF
MEASUREMENTS:
- 4.25" tall x 6.65" wide x 3.61" deep
AMOUNT OF MATERIAL NEEDED:
- Just BARELY over 1 sheet of 11" x 19" material + a 2" strip on a second sheet
MATERIAL I USED:
- 1/8" MDF - the design is made for 0.125" material.
- Rustoleum Spray Primer and Montana 94 Spray Paints
- Gorilla Glue Super Glue Gel
------
STORE
PROJECT OVERVIEW VIDEO: https://youtu.be/nOZIZ52cms8
TIPS:
- Watch the Project Assembly Video for a complete walkthrough of assembly.
- We painted the pieces after cutting them - EXCEPT the "No. 1" sign. With that sign, we pre-painted a small scrap of MDF and then masked and cut/engraved it so the engraving would be nice and clean.
** MARKETING PHOTOS INCLUDED!
FILE FORMATS:
- Ai
- SVG
- DXF
MEASUREMENTS:
- 4.25" tall x 6.65" wide x 3.61" deep
AMOUNT OF MATERIAL NEEDED:
- Less than 1 sheet of 11" x 19" material
MATERIAL I USED:
- 1/8" MDF - the design is made for 0.125" material.
- Rustoleum Spray Primer and Montana 94 Spray Paints
- Gorilla Glue Super Glue Gel
------
BARBER SHOP
PROJECT OVERVIEW VIDEO: https://youtu.be/M1xuG79Cnq8
TIPS:
- Watch the Project Assembly Video for a complete walkthrough of assembly.
- We painted all of the pieces after cutting EXCEPT the sign above the door. For that we painted a small part of our MDF and masked and then cut and engraved to keep it nice and crisp!
- For the window and door, we chose to use 1/8" clear acrylic and engraved it backwards to make the engraving be on the inside for a nice, finished look. But you can use any material you prefer.
** MARKETING PHOTOS INCLUDED!
FILE FORMATS:
- Ai
- SVG
- DXF
MEASUREMENTS:
- 4.25" tall x 6.65" wide x 3.61" deep
AMOUNT OF MATERIAL NEEDED:
- Less than one sheet of 11" x 19" material + a 2" strip on a second sheet
MATERIAL I USED:
- 1/8" MDF - the design is made for 0.125" material.
- Rustoleum Spray Primer and Montana 94 Spray Paints
- Gorilla Glue Super Glue Gel
------
TOWN SQUARE
TIPS:
- You can cut as many benches and lampposts as you'd like!
- The decorative rings that go on the Christmas Tree are intentionally laid out so that when you cut them, the parts you use vs throw away will be obvious. The full circles you keep and the others you throw away. It'll make sense when you see them. :)
FILE FORMATS:
- Ai
- SVG
- DXF
MEASUREMENTS:
- Christmas Tree: 6.85" x 3.99"
- Layered Base: 5.14" x 5.14"
- Lamppost: 2.59" x 0.54"
- Santa Statue: 1.35" x 1.59" x 3.35"
- Bench: 1.3" x 1.62" x 0.4"
AMOUNT OF MATERIAL NEEDED:
- Less than one sheet of 11" x 19" material
- Cut as many lampposts and benches as you like!
MATERIAL I USED:
- 1/8" MDF - the design is made for 0.125" material.
- Rustoleum Spray Primer and Montana 94 Spray Paints
- Gorilla Glue Super Glue Gel
