Gear Award

Write a review


Use this award at car shows and more! Make it with great materials and colors and it’ll stand out in a crowd and feel great in the hand as it’s presented. Learn more under the Project Details tab above.

* This is a file to download and cut on your laser. There's nothing physical included. *

Project Details


  • The base slots are initially 0.23”, but you’ll edit those to match the materials you’re using.
  • I highly recommend 1/4” material your awards. They look and feel much more substantial and valuable. But you can mix in 1/8” like I did here. And mixing colors can really make it look fantastic too!
  • I used 1/4” clear for the center piece and 1/8” acrylic for the two gear shapes on the front and back. Then I used 1/4” for all of the smaller half gears and the circle bases.
  • IMPORTANT NOTE: There are 2 rectangles included. They are to be glued in between the 3 vertical layers to give them stability and not lean toward each other.
    • To use these rectangles, you’ll need to measure your material with calipers and then move the base slots to be exactly that distance apart.
    • Then the rectangles can be glued between the 3 vertical layers, making all 3 very solid and secure.
    • For this spacing between the slots, kerf doesn’t matter. Just space them the actual material thickness size.



  • Ai
  • SVG
  • PDF
  • DXF
  • EPS



  • 7.6" tall x 6.9" wide
  • Slot size: 0.23"
  • IMPORTANT! You'll edit each slot to match the material thickness you choose!



  • 1/4" Clear Acrylic, 1/4" Black Acrylic, and 1/8" Bronze Metallic Acrylic from



  • 1 to 1.25 sheets of 11" x 19" material
This section doesn’t currently include any content. Add content to this section using the sidebar.